To Close The Hood - Chevrolet 2014 Cruze Owner's Manual

2. Go to the front of the vehicle and
push the secondary hood
release handle toward the driver
side of the vehicle.
3. Lift the hood and release the
hood prop from its retainer,
located above the radiator.
Securely place the hood prop
into the slot on the underside of
the hood.

To close the hood:

1. Before closing the hood, be sure
all the filler caps are on properly.
Then, lift the hood to relieve
pressure on the hood prop.
Remove the hood prop from the
slot on the underside of the hood
and return the prop to its
retainer. The prop rod must click
into place when returning it to
the retainer to prevent hood
damage.
2. Lower the hood 30 cm (12 in)
above the vehicle and release it
so it fully latches. Check to
make sure the hood is closed
and repeat the process if
necessary.