Poweredge T20 Base Fixed Configurations - Dell PowerEdge T20 Technical Manual

Processors
Front side bus (FSB)
Memory
Hard drive bays
SATA ports/speed
(on-board)
PCIe & PCI slots
USB
Internal USB
LAN on motherboard
(LOM)
Power supplies
Systems management
Software RAID

PowerEdge T20 base fixed configurations

The PowerEdge T20 offers three fixed configurations with options that enable you to tailor your T20
to best suit your needs. Contact your Dell service representative to:
•
Install additional memory and hard drives.
•
Add an operating system or application software.
•
Add external devices, such as laptops, desktop PCs, printers and projectors.
•
Add deployment services to get you up and running.
•
Get support services to keep you running smoothly over time.
Table 3 outlines the three base fixed configurations on the T20 as well as additional options.
Dell PowerEdge T20 Technical Guide
Intel Xeon processor E3-1200
product family
DMI II (Direct Media Interface)
Up to 32GB (4 DIMMs):
1GB/2GB/4GB/8GB DDR3 up to
1600MT/s
Up to 4 3.5" SATA/SAS (cabled) hard
drives or 6 x 2.5"
5 ports; 5x3Gbps
1x16 (x8, 3.0)
1x8 (x8, 3.0)
1x8 (x4, 2.0)
1x4 (x1, 2.0)
2 (front), 4 (rear) 2.0
2 (type-A adapter)
1 port
305W 80+
Basic management
PERC S100
Intel Xeon processor E3-
1200v3 product family,
Intel Pentium processors
Intel Direct Media Interface
Up to 32GB (4 UDIMM)
2GB/4GB/8GB unbuffered
1600MT/s ECC
Up to 6 internal (cabled)
hard drives total:
•
Up to four 3.5" SATA
hard drives, plus
•
Up to two 2.5" SATA hard
drives (require expansion
kits) with optional
controller card
4 ports; 2x6Gbps; 2x3Gbps
1x16 (x16, PCIe 3.0)
1x16 (x4, PCIe 2.0)
1x1 (x1, PCIe 2.0)
1 PCI slot
2 (front), 4 (rear) 2.0
2 (front), 2 (rear) 3.0
2 (10-pin)
1 port
290W
Intel Active Management
Technology (AMT) 9.0
(with Intel Xeon processors)
Intel Rapid Storage
Controller 12.0
5