Advertisement
1.1
Specifications
Form Factor
Board Size
CPU
System Memory
Second-level Cache
Chipset
Expansion Slots
Serial Port
Parallel Port
Floppy Interface
IDE Interface
USB Interface
PS/2 Mouse
Keyboard
RTC and Battery
BIOS
Suspend to Hard Drive
Switching Regulator
Over-current
Protection
CPU Thermal
Protection
Baby AT
220 mm x 280 mm
Intel Pentium Processor P54C, PP/MT (P55C), AMD
K5/K6, Cyrix 6x86 and IDT C6.
FPM (Fast Page Mode) or EDO (Extended Data Output) 72-
pin SIMM x4, and SDRAM 168-pin x2 maximum 256MB.
256KB or 512KB pipelined-burst cache onboard
Intel 82430TX PCIset
ISA x3 and PCI x4
Two serial ports UART 16C550 compatible
One parallel port supports standard parallel port (SPP),
enhanced parallel port (EPP) or extended capabilities port
(ECP).
Floppy interface supports 3.5 inches drives with 720KB,
1.44MB or 2.88MB format or 5.25 inches drives with
360KB, 1.2MB format
Dual-channel IDE interface support maximum 4 IDE hard
disks or CDROM, mode 4 , bus master hard disk drives and
Ultra DMA/33 mode hard drives are also supported.
Two USB ports supported by USB bracket, the BIOS also
supports USB driver to simulate legacy keyboard.
PS/2 mouse supported by PS/2 mouse bracket.
Default AT compatible keyboard, mini-DIN PS/2 keyboard
connector is optional.
RTC build in Intel PIIX4 chipset, Lithium (CR-2032)
battery.
AWARD Plug-and-Play Flash ROM BIOS
Supported by BIOS, save your work to hard disk and
resume within a very short time. VESA compatible VGA
and Sound Blaster compatible sound card required.
High efficient switching regulator for future CPU.
3.3V 10A and CPU core voltage 15A over-current
protection to prevent any accident short circuit.
Warning when CPU temperature is higher than the
predefined value.
Overview
1-3
Advertisement
