Installing The Dvd R/Rw Drive In A Host Pc - AOpen DRW8800 AAN User Manual

---------------------------------------------------------------------------------------------

Installing the DVD R/RW drive in a host PC

Note
Refer to the guidebook included with your personal computer for instructions on installing the DVD R/RW
drive. This chapter gives one example of installation. And, when disconnecting the DVD R/RW drive from
computer equipment, please wait to remove a couple of minutes until it gets cold. The enclosure may have
some points over 60 C degree.
1. Attach the mounting rails to both the left and right sides of the DVD R/RW drive.
2. Turn off the computer, other peripherals and unplug all the cords and cables. Then remove the computer
cover, face plate, mounting clips, and keeper bracket. Refer to the Guide to Operations that came with your
computer for help with this step.
3. Slide the disc drive out approximately 50 ~ 70mm (2 ~ 3 in.), but do not disconnect the cables.
4. Slide the DVD R/RW drive into the computer until it is even with the disc drive.
DISC DRIVE
DVD R/RW DRIVE
WITH MOUNTING
RAILS
- 9 -