Advertisement
Prepare Your Computer for Installation
Prior to working on your computer, make sure the power and any
related equipment is turned off.
How to Insert Your AOpen PT80 Graphics Card
Installation Procedures
u
For The First Time Installation
1. Locate bus expansion slot. Make sure the slot is unobstructed.
2. Remove the corresponding expansion slot cover from the computer
chassis.
3. Position the card directly over the slot and insert one end of
the card down into the slot. Be sure the metal contacts on the
bottom of the host adapter are securely seated in the slot.
4. Connect your analog monitor's 15-pin VGA connector to the card
and fasten the retaining screws(if any).
5. Connect other cables and devices if available.
6. Now you are ready to install the software drivers and utilities.
u
For Systems with Existing VGA Card
1. Change your display driver to Standard VGA.
2. Shut down your computer and unplug all electrical cords.
3. Replace the existing VGA card with the PT80 graphics card.
4. Restart your computer and install the PT80 display driver.
Hardware Installation
Advertisement
