Electrical connection
Details about the voltage, type of supply and the fuses required are to
be found on the rating plate. The rating plate is located on the right-
hand inner edge of the dishwasher door.
To isolate the dishwasher from the mains, pull out the mains plug.
Important:
– The plug must be accessible after the appliance has been installed.
– Following installation, live parts and insulated wiring must not be ac-
cessible to a test finger in accordance with DIN EN 60335-1.
Connecting systems
The water inlet hose, drain hose and the mains cable must all be con-
nected to the side of the dishwasher as there is no space for them be-
hind the appliance.
2 connection pieces 45° or
straight, outer ø 19 mm,
water-
inlet
36
length 30 mm
mains
water-
cable
drainage
doublevalve
mains socket
water-
waterinlet
drainage
mains cable