homexpert THR842DUK User Manual page 10

Installation and Setup
Test thermostat location
(continued from page 17)
Test signal strength to find a suitable location for the thermostat
EE
before installation.
se
Press
and hold
While still in Test mode (see pages 16-17), press and hold the q
again
button until the screen changes as shown, then move the thermostat
and check the screen display until you find a suitable location.
Check Signal strength:
55
wireless
3
0 — 2: No. Move the thermostat to another location.
signal
strength
3 — 5: Yes. Location is good.
Press and hold the ON/OFF button to stop the test.
25.
°
c
0
Press
and hold
to stop
18
Install thermostat
Thermostat
Wall
bracket
homexpert by Honeywell THR842DUK Wireless Digital Thermostat
tm
The wireless thermostat can be mounted in the table stand,
or on a wall. For wall mounting, remove the thermostat cover
and use a screwdriver to separate the thermostat from the
wall bracket as shown at left. Install the wall bracket about
1.2 to 1.5 metres above the floor.
• Do not install near sources of hot or cold air (radiators,
windows, heating or cooling ducts).
• Install at least 30 cm from metal objects.
• Install at least 1 metre away from other electronic devices
(TV, sound system, PC, etc.).
Table stand
assembly
19