Epson STYLUS PHOTO R300 Series Operation Manual page 59

❏ Filter in More Options
❏ Small Image Enhancer in More Options
❏ Brightness in More Options
❏ Saturation in More Options
❏ Sharpness in More Options
❏ Contrast in More Options
❏ Automatic Correction in More Options
* The DPOF and P.I.F. Index settings are not available.
Note:
❏ This function is not available in Basic Mode.
❏ You cannot store or load the settings or restore stored settings when
an error occurs, when printing the nozzle check pattern or cleaning
the print head or replacing the ink cartridge and aligning the print
head.
❏ You can store the settings for Filter, Brightness, Saturation,
Contrast and Sharpness when All is set as Photo Number in
More Options.
Follow the steps below to store the settings on the LCD panel to
the Custom buttons.
1. Make the settings that you want to use.
2. Press the Custom button for more than two seconds. The
message "The present settings have been saved" is displayed
in the LCD panel.
To you restore stored settings, press the Custom button for more
than two seconds.
59