Epson STYLUS PHOTO 875DC User Manual page 18

Error messages
Unable to
complete the
operation due to
insufficient
memory.
Unable to output
an image.
Unable to create
the object.
There is insufficient
memory, or the file
cannot be found.
Unable to save the
default.
Unable to save the
Settings Menu
information that
was input.
You must type a
name for the
settings.
14
Cause
There is insufficient
memory.
There is insufficient
memory.
An incorrect output
destination was
specified.
There is insufficient
memory.
There is insufficient
memory.
An unreadable file exists
(this usually means that
the required file has
been moved or
deleted).
The floppy disk or MO to
be written to is locked.
There is insufficient
space on the disk to
save the data.
The floppy disk or MO to
be written to is locked.
There is insufficient
space on the disk to
save the data.
A name was not
entered before OK was
clicked.
Solution
Install sufficient memory
and try again.
Install sufficient memory
and try again.
Specify a correct output
destination and try
again.
Install sufficient memory
and try again.
Install sufficient memory
and try again.
Restart EPSON
PhotoQuicker.
Close EPSON
PhotoQuicker, unlock
the disk, and then restart
EPSON PhotoQuicker.
Save the data to a disk
with sufficient space.
Close EPSON
PhotoQuicker, unlock
the disk, and then restart
EPSON PhotoQuicker.
Save the data to a disk
with sufficient space.
Type a name and click
OK.