Drive Chain Lubrication; Cable Inspection And Lubrication - Yamaha XJR1300 Owner's Manual

CAUTION:
@
Too little chain slack will overload
the engine and other vital parts.
Keep the slack within the specified
limits.
@
3. After adjusting, tighten the lock-
nuts. Then tighten the axle nut to
the specified torque.
Tightening torque:
Axle nut:
150 Nm (15.0 m·kg)
PERIODIC MAINTENANCE AND MINOR REPAIR
EC000096

Drive chain lubrication

The chain consists of many parts which
work with each other. If the chain is not
maintained properly, it will wear out
quickly. Therefore, the chain must be
serviced regularly. This service is es-
pecially necessary when riding in dusty
areas. This motorcycle is equipped
with a sealed type chain. Steam clean-
ing, high-pressure washers, and sol-
vents can damage the drive chain, so
do not use these for cleaning it. Use
only kerosene to clean the drive chain.
Wipe it dry, and thoroughly lubricate it
with SAE 30 ~ 50W motor oil. Do not
use any other lubricants on the drive
chain. They may contain solvents that
could damage the sealed chain.
CAUTION:
@
Be sure to oil the chain after wash-
ing the motorcycle or riding in the
rain.
@
6-20
EAU03006
Cable inspection and
lubrication
WARNING
@
Damage to the outer housing of ca-
bles may lead to internal rusting and
interfere with the cable movement.
Replace damaged cables as soon as
possible to prevent unsafe condi-
tions.
@
Lubricate the cables and cable ends. If
a cable does not operate smoothly, ask
a Yamaha dealer to replace it.
Recommended lubricant:
Engine oil
EC000097
EAU02962
EW000112
6