Speedometer Unit - Yamaha TDM900 Owner's Manual

1. Speedometer
2. Odometer/tripmeter
3. "SELECT" button
4. "RESET" button
5. Fuel gauge

Speedometer unit

Speedomet e r uni t
The speedometer unit is equipped
with the following:
8 a digital speedometer (which
shows riding speed)
8 an odometer (which shows the
total distance traveled)
8 two tripmeters (which show the
distance traveled
were last set to zero)
INSTRUMENT AND CONTROL FUNCTIONS
8 a fuel reserve tripmeter (which
shows the distance traveled on
the fuel reserve)
8 a fuel gauge
8 a self-diagnosis device
NOTE:
Be sure to turn the key to "ON"
before using the "SELECT" and
"RESET" buttons.
Odometer and tripmeter modes
Pushing the "SELECT" button switch-
EAU04428
es the display between the odometer
mode "ODO"
modes "TRIP 1" and "TRIP 2" in the
following order:
ODO → TRIP 1 → TRIP 2 → ODO
since they
If the fuel level warning symbol flash-
es (see page 3-2), the odometer dis-
play will automatically change to the
fuel reserve tripmeter mode "TRIP F"
and start counting the distance trav-
eled from that point. In that case,
pushing the "SELECT" button switch-
es the display between the various
tripmeter and odometer modes in the
following order:
TRIP F → TRIP 1 → TRIP 2 → ODO
→ TRIP F
To reset a tripmeter, select it by
and the tripmeter
pushing the "SELECT" button, and
then push the "RESET" button. If you
do not reset the fuel reserve tripmeter
manually, it will reset itself automati-
cally and the display will return to
"TRIP 1" after refueling and traveling
5 km.
3-4
3