Rear Shock Absorber Adjustment; Luggage Strap Holders - Yamaha Fazer FZS600 Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS
3
1. Spring preload adjusting ring
2. Special wrench
Rear shock absorber
adjustment
This shock absorber is equipped with a
spring preload adjusting ring. Adjust
spring preload as follows. Turn the ad-
justing ring in direction a to increase
spring preload and in direction b to de-
crease spring preload. Make sure that
the appropriate notch in the adjusting
ring is aligned with the position indica-
tor on the rear shock absorber.
CI-18E
Hard
Adjusting
9 8 7 6
position
WARNING
@
This shock absorber contains high-
ly pressurized nitrogen gas. Read
and understand the following infor-
mation before handling the shock
absorber. The manufacturer cannot
be held responsible for property
damage or personal injury that may
result from improper handling.
Do not tamper with or attempt to
EAU00295
open the cylinder assembly.
Do not subject the shock ab-
sorber to an open flame or other
high heat source. This may
cause the unit to explode due to
excessive gas pressure.
Do not deform or damage the
cylinder in any way. Cylinder
damage will result in poor
damping performance.
Take your shock absorber to a
Yamaha dealer for any service.
Stan-
@
Soft
dard
5 4 3 2 1
EAU00315
1. Luggage strap holder ( 2)

Luggage strap holders

There are two luggage strap holders
below the rear of the seat which can be
turned outward for easier access.
3-17
EAU01311