Starter (Choke) Lever; Seat - Yamaha DT125R Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS
RES
3
This indicates reserve. If you run out
of fuel while riding, move the lever to
this position. Fill the tank at the first
opportunity. Be sure to set the lever
back to "ON" after refueling!
Starter (choke) lever "q"
1. Choke lever
Starting a cold engine requires a
richer air-fuel mixture, which is sup-
plied by the starter (choke).
Move the lever in direction (a) to turn
on the starter (choke).
Move the lever in direction (b) to turn
off the starter (choke).
1

Seat

To remove the seat
Remove the bolts, and then pull the
seat off.
EAU13590
1. Bolt (x2)
To install the seat
1. Insert the projections on the front
EAU13960
1
2. Place the seat in the original
NOTE:
Make sure that the seat is properly
secured before riding.
3-8
of the seat into the seat holders
as shown.
position, and then tighten the
bolts.