Clutch Lever - Yamaha FJR1300 Owner's Manual

Horn switch " "
Press this switch to sound the horn.
Engine stop switch " /
Set this switch to " " before starting
the engine. Set this switch to "
stop the engine in case of an emergen-
cy, such as when the vehicle overturns
or when the throttle cable is stuck.
Start switch " "
Push this switch to crank the engine
with the starter.
CAUTION:
See page 5-1 for starting instruc-
tions prior to starting the engine.
INSTRUMENT AND CONTROL FUNCTIONS
EAU12500
Hazard switch "
EAU12660
"
" to
1. Hazard switch "
EAU12710
With the key in the "ON" or "
tion, use this switch to turn on the haz-
ard light (simultaneous flashing of all
ECA10050
turn signal lights).
The hazard light is used in case of an
emergency or to warn other drivers
when your vehicle is stopped where it
might be a traffic hazard.
CAUTION:
Do not use the hazard light for an ex-
tended length of time, otherwise the
battery may discharge.
EAU12731
"

Clutch lever

"
1. Clutch lever
2. Arrow mark
" posi-
3. Clutch lever position adjusting dial
4. Distance between clutch lever and handlebar
The clutch lever is located at the left
handlebar grip. To disengage the
clutch, pull the lever toward the handle-
bar grip. To engage the clutch, release
the lever. The lever should be pulled
ECA10060
rapidly and released slowly for smooth
clutch operation.
The clutch lever is equipped with a
clutch lever position adjusting dial. To
adjust the distance between the clutch
lever and the handlebar grip, turn the
adjusting dial while holding the lever
pushed away from the handlebar grip.
3-9
grip
EAU12830
3