Yamaha FZ1-S Owner's Manual page 84

PERIODIC MAINTENANCE AND ADJUSTMENT
2. Unhook the battery band, and then
remove the battery cover.
1. Battery band
2. Battery cover
3. Remove the starter relay cover by
6 pulling it upward.
1
1. Starter relay cover
2. Fuel injection system fuse
3. Fuel injection system spare fuse
4. Remove the blown fuse, and then
install a new fuse of the specified
amperage. WARNING! Do not
use a fuse of a higher amperage
rating than recommended to
avoid causing extensive dam-
age to the electrical system and
possibly a fire.
Specified fuses:
Main fuse:
50.0 A
Headlight fuse:
25.0 A
Signaling system fuse:
10.0 A
Ignition fuse:
15.0 A
Fuel injection system fuse:
15.0 A
2 Taillight fuse:
10.0 A
Radiator fan fuse:
10.0 A × 2
3
Backup fuse:
10.0 A
ABS control unit fuse:
FZ1-SA 10.0 A
ABS motor fuse:
FZ1-SA 30.0 A
6-34
5. Turn the key to "ON" and turn on
the electrical circuit in question to
check if the device operates.
6. If the fuse immediately blows
again, have a Yamaha dealer
check the electrical system.
7. Install the starter relay cover.
8. Install the battery cover, and then
[EWA15131]
hook the battery band onto the
holder.