Table of Contents
Advertisement
Operating Instructions
Starting a dishwashing cycle
0
1. Check that the dishes and cutlery are stacked in the dishwasher in such
a way that the spray arms are free to rotate.
2. Turn on the tap fully.
3. Press the ON/OFF button.
The LED indicators for all the buttons in the control panel that are now
able to be selected will become illuminated.
4. Press the relevant button for the cycle required (see "Cycle Table").
The cycle display will become illuminated.
The remaining time for the cycle will be shown in the multi-display.
The remaining time for the cycle is adjusted according to amount of
3
dishes, degree of soiling, etc.
5. Close the dishwasher door. The dishwashing cycle will begin.
If an error message is displayed in the multi-display and/or if an acous-
3
tic error message can be heard after the cycle has begun, please read
the section "What to do if ...".
Changing/interrupting/aborting a dishwashing cycle
Only change or interrupt a dishwashing cycle that is in progress if it is
3
absolutely necessary. After the appliance has been closed again, the air
that has entered will be heated significantly and expand. As a result,
water may collect in the base of the appliance and trigger the anti-
flood system.
Changing a dishwashing cycle
If you would like to change the dishwashing cyclebefore closing the
3
dishwasher door, briefly press the button for the new dishwashing
cycle.
If you would like to change the dishwashing cycle after the cycle has
commenced, proceed as follows:
Hot steam may escape when the dishwasher door is opened. There is a
1
risk of scalding! Be careful when opening the door of the dishwasher.
0
1. Open the door of the dishwasher. The dishwashing cycle will stop.
2. Press the button for the new dishwashing cycle and hold it down.
First, the indicator for the dishwashing cycle that is currently running
will flash.
After several seconds only the indicator for the new dishwashing cycle
will be flashing.
28
Hide quick links:
Advertisement
Table of Contents
