Table of Contents
Advertisement
HOW TO INSTALL BATTERIES
To install the batteries, follow the procedures below:
1. Slide down further to access the
battery compartment.
The precautions below should be followed when using batteries in this device:
1. Use only the size and type of batteries specified.
2. Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment. Reversed
batteries may cause damage to the device.
3. Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc) or old batteries with fresh ones.
4. If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible
battery leakage.
5. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. (Follow battery manufac-
turer's directions).
CELSIUS TO FAHRENHEIT CONVERSION CHART
CELSIUS
16
17
18
19
20
21
22
24
23
NOTES:
• When operating the remote controller, make sure there are no obstructions between the remote controller and the re-
mote sensor.
• After a while the display goes blank to conserve battery power. To check the settings, press the ON/OFF button once.
2. Insert two "AAA" size
Alkaline batteries following
the polarity diagram below.
BATTERY PRECAUTIONS
FAHRENHEIT
60.8
63
64.4
66.2
68
69.8
71.6
75.2
73.4
5
CELSIUS
25
26
27
28
29
30
31
32
FAHRENHEIT
77
78.8
80.6
82.4
84.2
86
87.8
89.6
Advertisement
Table of Contents
