Audible Signals - Electrolux ESI 9112 Instruction Book

3 in 1 button
: This appliance is equipped with the 3 in 1
function, that allows the use of the "3 in 1" combi detergent
tablets.
This function can be selected with all washing programmes.
With the selection of this function the inflow of rinse aid and
salt from each respective supply container is automatically
deactivated and also the indicator lights for salt and rinse aid
are deactivated.
Select the 3 in 1 function before the set of a washing
programme.
Once selected this function (button indicator light illuminated) it
will remain active also for the following washing programmes,
to deactivate the function, press the button (button indicator
light off).
With the use of the 3 in 1 function, the cycle durations may
change. In this case, in the digital display, the indication of the
running time of the programme is automatically updated.
NOTE:
Once the programme is running, the 3 in 1 function
can NO longer be changed. If you want to exclude the 3 in 1
function you have to cancel the programme setting (see
chapter "Starting a washing programme" - "Cancel a washing
programme in progress") and then deactivate the 3 in 1
function.
In this case you have to set a washing programme (and
eventual options) again.
NOTE:
With the use of this function together with programme
Plate Warmer, the drying results may not be optimum.
NOTE:
if the drying results are not satisfactory we suggest to
reactivate the rinse aid dispenser.
The activation/deactivation of the rinse aid dispenser can only
be possible with the 3 in 1 function active.
Activation/deactivation of the rinse aid
dispenser
(The dishwasher must be switched off)
When the rinse aid dispenser has been activated, also the
rinse aid indicator light on the control panel is
automatically activated.
1. Press the On/Off button. The indicator light of the
programme selection button will illuminate and 2 horizontal
lines (--) are visible in the digital display (setting mode).
If the number of a programme (1 - 2 - 3 etc..) is visible in the
display, this means that a washing programme is set.
The programme must be cancelled: press the button
cancel for about 2 seconds. 2 horizontal lines will appear in
the digital display, this means that the set washing
programme has been cancelled and the machine is now in
setting mode.
2. Press simultaneously function buttons 2 and 3, the indicator
lights of the function buttons 1, 2 and 3 start flashing.
3. Press function button 2, the indicator lights of function
buttons 1 and 3 turn off while the indicator light of the button
2 goes on flashing, the digital display indicates the current
setting.
Rinse aid dispenser deactivated
Rinse aid dispenser activated
4. To change the setting, press again function button 2, the
digital display indicates the new setting.
5. To memorise the operation, switch off the dishwasher by
pressing the On/Off button or wait about 60 seconds after
which the dishwasher will automatically return to setting
mode.

Audible signals

Audible signals have been introduced to help indicate which
operations the dishwasher is performing:
- setting of the water softener
- end of programme
- intervention of an alarm due to malfunction
Deactivation/activation of the audible signals
(The dishwasher must be switched off)
Factory setting: audible signals activated
1. Press the On/Off button. The indicator light of the
programme selection button will illuminate and 2 horizontal
lines (--) are visible in the digital display (setting mode).
If the number of a programme (1 - 2 - 3 etc..) is visible in the
display, this means that a washing programme is set.
The programme must be cancelled: press the button
cancel for about 2 seconds. 2 horizontal lines will appear in
the digital display, this means that the set washing
programme has been cancelled and the machine is now in
setting mode.
2. Press simultaneously function buttons 2 and 3, the indicator
lights of the function buttons 1, 2 and 3 start flashing.
3. Press function button 3, the indicator lights of function
buttons 1 and 2 turn off while the indicator light of the button
3 goes on flashing, the digital display indicates the current
setting.
Audible signals deactivated
Audible signals activated (factory set)
4. To change the current setting, press again function button 3,
the digital display will indicate the new setting.
5. To memorise the operation, switch off the dishwasher by
pressing the On/Off button or wait about 60 seconds after
which the dishwasher will automatically return to setting
mode.
6