Table of Contents
Advertisement
Consumption values
Programme
The water pressure and temperature, the variations of the mains supply and the quantity of
dishes can change the consumption values.
SETTING AND STARTING A WASHING PROGRAMME
Select and start a washing programme without delay
1.
Switch on the appliance.
2.
Make sure that the appliance is in setting mode.
3.
Select a washing programme. Press the programme button again and again until the
programme light related to the washing programme comes on. Refer to the 'Washing
programmes' table.
4.
Close the appliance door. The washing programme starts automatically.
Select and start a washing programme with delay start
1.
Switch on the appliance and select a washing programme
2.
Press the delay start button.
– The delay start indicator light comes on.
3.
Close the appliance door.
– The countdown starts automatically.
– When the countdown is completed, the washing programme starts automatically.
The opening of the appliance door interrupts the countdown. When you close the door, the
countdown continues from the point of interruption.
Interruption of a washing programme
• Open the appliance door.
– The washing programme stops.
• Close the appliance door.
– The washing programme continues from the point of interruption.
Setting and starting a washing programme
Programme time (mi-
nute)
120-130
100-110
130-140
12
Energy (kWh)
1,8-2,0
1,4-1,6
1,0-1,2
0,1
17
Water (litre)
22-24
19-21
14-16
5
Advertisement
Table of Contents
