Aintro Operations; Crepeat; Dprogramming / Memory / As/Ps - OEM IW-SYS3 Owner's Manual

Operations
A
INTRO OPERATIONS:
When active, "Intro" plays the first 10 seconds of each audio track of the CD or USB drive.
1. When In CD or USB mode, press the INTRO button to start the intro scan mode.
2. Press the INTRO button again to release the intro scan mode.
B
RANDOM OPERATIONS
Random, also known as shuffle play, mixes the playback order of audio tracks. When Random mode is active
the CD or USB drive will play continuously until stopped. It will play through all the tracks before repeating any
previously played tracks.
1. When In CD or USB mode, press the RANDOM button to set the random playing mode.
2. Press the RANDOM button again to release the random playing mode.
C
REPEAT
1. When REPEAT is pressed the first time, the display will show
audio track repeatedly until deactivated.
2. When Repeat is pressed a second time, the display will show
entire volume of audio tracks repeatedly until stopped.
3. Press the REPEAT button again to cancel the repeat operation.
D
PROGRAMMING / MEMORY / AS/PS
To Program a Radio Preset:
1. Tune the radio to the desired frequency.
2. Press the MEMORY button
3. Select the desired Preset using the PRESET
exit the program mode.
4. Press the MEMORY button to store the Preset. The display will stop flashing and show the stored Preset.
5. Repeat for each desired Preset. The Preset value will increment automatically after storing a station.
To Program Playback Order of Audio Tracks:
1. Select the input that you wish to use, CD or USB. The drive will begin playing automatically after it has
initialized.
2. Press the STOP
3. Press the MEMORY button. The display will show P-01 001, indicating that the system is in Program mode.
The system will remain in Program mode until the PLAY
The P-01 is the program number and the 001 is the Track number.
4. Select a desired track using the
The display will increment to P-02 indicating that it is waiting for the next Program number.
5. Continue adding tracks by selecting the track and pressing MEMORY.
6. Press PLAY
Note: The system will continue to repeat the programmed tracks until the input is changed or STOP
The Programming will be lost once either is performed. It is not possible to add songs to the playback list once
playback begins.
AM / FM / CD / AUX / USB
. The display will begin flashing a Preset number (1-30).
9
button after initialization.
to begin playback of the programmed tracks.
and the CD or USB drive will play a single
and the CD or USB drive will now play the
buttons. If no action is taken for 3 seconds the system will
button is pressed or another input is selected.
navigation buttons. Press the MEMORY button to store the track.
is pressed.
IW-SYS3:
In-Wall Audio System
Rev. C
17