Digital Clock - Honda CBR250R/RA Owner's Manual

Digital Clock

Shows hour and minute. To set the digital
clock, proceed as follows:
1. Turn the ignition switch ON.
2. Push and hold both the MODE button
( ) and RESET button ( ) for more than 2
2 seconds. The clock will be set in the
adjust mode with the hour display
flashing.
(2) (3)
(1) Digital clock
(2) MODE button
(3) RESET button
24
3
(1)
http://mototh.com
3. To set the hour, push the RESET button
until the desired hour and AM/PM are
displayed.
The time is advanced by one hour,
each time the button is pushed.
The time advances fast when the
button is pushed and held.
4. Push the MODE button. The minute
display will start flashing.