Volvo V40 Cross Country Owner's Manual page 81

Overview, light switches
Overview, light switches.
Thumbwheel for adjusting display and
instrument lighting and ambient lighting*
Button for rear fog lamp
Knob for daytime running lights and park-
ing lamps
20
Thumbwheel for headlamp levelling
Not available for cars equipped with active Xenon headlamps*.
20
Knob positions
Posi- Specification
tion
Daytime running lights
the car's electrical system is in
key position II or the engine is
running.
Main beam flash can be used.
Daytime running lights and
position/parking lamps/side
marker lamps when the car's
electrical system is in key posi-
tion II or the engine is running.
Automatic switching to posi-
tion/parking lamps/side marker
lamps when the car is parked.
Main beam flash can be used.
03 Instruments and controls
Posi- Specification
tion
Daytime running lights and
position/parking lamps/side
A when
marker lamps during the day
when the car's electrical sys-
tem is in key position II or the
engine is running.
Automatic switching to dipped
beam and position/parking
lamps/side marker lamps in
poor light conditions or when
the windscreen wipers or rear
fog lamps are activated.
The tunnel detection (p. 82)*
function is activated.
The active high beam (p. 83)*
function can be used.
Main beam can be activated
when dipped beam is switched
on.
Main beam flash can be used.
*
Option/accessory, for more information, see Introduction.
03
}}
79