Gigabyte GA-8I845GE775-G User Manual page 33

Gigabyte technology ga-8i845ge775-g intel pentium 4 lga775 processor motherboard user's manual
Table of Contents

Advertisement

Password Check
Setup
System
If you want to cancel the setting of password, please just press ENTER to make [SETUP] empty.
CPU Hyper-Threading
This option appears only when the processor you install supports Intel
Enabled
Disabled
Limit CPUID Max. to 3
This option is available only when you install an Intel
Enabled
Disabled
No-Execute Memory Protect
Enabled
Disabled
CPU Enhanced Halt (C1E)
Enabled
Disabled
CPU Thermal Monitor 2 (TM2)
Enabled
Disabled
CPU EIST Function
Enabled
Disabled
Init Display First
Select the first initiation of the monitor display from onboard/AGP or PCI VGA card.
PCI
Onboard/AGP
Graphics Aperture Size
This option is available only when you use the onboard VGA function.
128MB
Disabled
Graphics Share Memory
This option is available only when you use the onboard VGA function.
8MB
1MB
(Note) This item will show up when you install a processor that supports this function.
The system will boot but will not access to Setup page if the correct
password is not entered at the prompt. (Default value)
The system will not boot and will not access to Setup page if the correct
password is not entered at the prompt.
Enable CPU Hyper-Threading feature. Please note that this feature is only
working for operating system with multiprocessors mode supported. (Default
value)
Disable CPU Hyper-Threading.
Limit CPUID Maximum value to 3 when using older OS like NT4.
Disable CPUID Limit for Windows XP.(Default value)
(Note)
Enable No-Execute Memory Protect function.(Default value)
Disable No-Execute Memory Protect function.
(Note)
Enable CPU Enhanced Halt (C1E) function.(Default value)
Disable CPU Enhanced Halt (C1E) function.
(Note)
Enable CPU Thermal Monitor 2 (TM2) function.(Default value)
Disable CPU Thermal Monitor 2 (TM2) function.
(Note)
Enable CPU EIST function.(Default value)
Disable CPU EIST function.
Set Init Display First to PCI VGA card.
Set Init Display First to onboard/AGP VGA card.(Default value)
Set Graphics Aperture Size to 128MB. (Default value)
Disable this function.
Set Graphics Share Memory to 8MB. (Default value)
Set Graphics Share Memory to 1MB.
- 33 -
Hyper-Threading Technology.
®
Prescott processor (with 533MHz FSB).
®
BIOS Setup

Advertisement

Table of Contents
loading

Table of Contents