Create Raid Volume - Gigabyte GA-8ANXP-D User Manual

Create RAID Volume

Press Enter under Create RAID Volume to set up RAID.
Enter a string between 1 and 16 characters in length that can be used
to uniquely identify the RAID volume. This name is case sensitive and
[ ]-Change
After entering the Create Volume Menu, you can set disk name with 1~16 letters (letters cannot be special
characters) under Name item.
After setting disk name, press Enter to select RAID Level.
RAID0(Stripe)- Creates a volume where equal portions of the volume
RAID1(Stripe)- Creates a volume where a redundant copy of the data is
[ ]-Change
There are two RAID levels: RAID0(Stripe) and RAID1(Mirror). After selecting the RAID level, press Enter to
select Strip Size.
GA-8ANXP-D Motherboard
Intel(R) Application Accelerator RAID Option ROM v4.0.6180
Copyright(C) 2003-04 Intel Corporation. All Rights Reversed.
[ CREATE VOLUME MENU ]
Name : RAID_Volume0
RAID Level : RAID0(Stripe)
Disks : Select Disks
Strip Size : 128KB
Capacity : 223.5 GB
Create Volume
[ HELP ]
can not contain special characters.
[TAB]-Next [ESC]-Previous Menu
Intel(R) Application Accelerator RAID Option ROM v4.0.6180
Copyright(C) 2003-04 Intel Corporation. All Rights Reversed.
[ CREATE VOLUME MENU ]
Name : RAID_Volume0
RAID Level : RAID0(Stripe)
Disks : Select Disks
Strip Size : 128KB
Capacity : 223.5 GB
Create Volume
[ HELP ]
Choose the RAID level best suited to your usage model.
are spread across all the disks. This creates a volume
with higher performance by accessing all disks at once.
stored on each disk. This creates a volume protected
from a single hard disk failure.
[TAB]-Next [ESC]-Previous Menu
- 70 -
[ENTER]-Select
[ENTER]-Select