Usb Playback - Akai ACVDS727 User Manual

No sound or
incomplete audio
No scan or skip possible
Picture distorted or noisy
Picture not full screen
Remote control (RC)
Trouble
RC does not function

USB playback

Trouble
No playback
16
Rating level of the disc is higher than the rating level
setting of the appliance.
Invalid region code.
Incorrect type of disc.
Disc may be damaged or dirty, clean the disc or try
another disc.
Moisture may have condensed inside the appliance.
Remove the disc and leave the appliance powered on for
one or two hours.
Select another audio track.
During SCAN, SLOW MOTION or SINGLE STEP the
sound is muted.
Check if the disc is in fast forward or fast rewind mode.
Press the PLAY/PAUSE button (40).
Some discs are programmed to refuse user action at
certain sections. This is no malfunction. Single chapter
or track discs do not allow skip function.
Disc may be damaged or dirty, clean the disc or try
another disc.
Check TV system setting (PAL/NTSC).
Clean the disc.
Select the screen format from the appliance's setup menu.
Select screen format in disc start menu.
Action
Check the battery installation.
Point the RC at the remote control sensor.
Stay within 6 metres of the appliance.
Action
USB device is not installed or installed incorrectly. Insert
USB device into slot.
Incompatible USB device used. Playback using any USB
device cannot be guaranteed. Please try another USB
device.
DVD/CD in disc compartment. Remove DVD/CD from
disc compartment.