Enable QoS/DSCP
Select the checkbox to configure the QoS/DSCP.
Set values (0-63) to mark the data traffic.
OK/Cancel
See "Buttons common to every menu" on page 15.
SNMP
SNMP configuration
Enable SNMPv1, SNMPv2c
Select the checkbox to enable SNMPv1 and SNMPv2c.
Read/Write community
Enter the name of Read/Write community.
Read only community
Enter the name of Read only community.
Enable SNMPv3
Select the checkbox to enable SNMPv3.
Read/Write security name
Enter the name of Read/Write security name.
Authentication type
Select the authentication method.
Authentication password
Enter the password for authentication (at least 8
characters).
Encryption password
Enter a password for encryption (at least 8 characters).
Read only security name
Enter the name of Read/Write security name.
Authentication type
Select the authentication method.
Authentication password
Enter the password for authentication (at least 8
characters).
Encryption password
Enter a password for encryption (at least 8 characters).
Configuring the Network — Network Menu
25