3D Settings - Panasonic TH-L42ET60Z E-Manual

3D Settings

1. Display the menu with
2. Select Picture
3. Select one of the following items with
3D Detection / 3D Signal Message
Picture Swap / Edge Smoother
4. Set with / /
To exit the menu screen
●
EXIT
3D Detection
(On (Advance) / On
Selects whether to switch to the 3D mode automatically.
On (Advance):
Detects all the 3D format signals and displays the 3D image
automatically.
On:
Detects the particular 3D format signals (Frame Sequential, etc.) and
displays the 3D image automatically.
To view 3D images without any notifications and operations, set to
●
(Advance).
3D Signal Message
(On / Off)
Selects whether to give a notification message when a signal of 3D format is
found.
Not valid when 3D Detection
●
For Digital TV, Component and HDMI input
●
2D 3D Depth
(Max / Mid / Min)
Selects a level of 3D-image depth for viewing converted 2D images.
3D Adjustment
(On / Off)
Adjustment of the 3D effect (except in
MENU
3D Settings with /
/ 2D 3D Depth
/ Safety Precautions
/ and press OK
/ Off)
is set to
2D 3D
- 38 -
and press OK to access
/ and press OK
/ 3D Adjustment
to store
On (Advance)
mode).
to access
/ L/R
On