V-Link/Mvc Local Switch; Wireless Lan Function Settings (Wireless); Basic Connection Method (Connect By Wps) - Roland RD-800 Owner's Manual

Detailed Settings for Each Function

V-LINK/MVC Local Switch

This setting determines whether or not the RD-800's sounds are
played when a key within the range set with Key Range is pressed.
Parameter Value
OFF
Local Switch
ON
Wireless LAN Function Settings
(Wireless)
By inserting the wireless USB Adapter
(WNA1100-RL; sold separately) into the RD-800's USB MEMORY/
WLAN ADAPTOR port, you'll be able to use wireless-compatible
applications (such as the "Air Recorder" iOS app).
iPad etc. Wireless LAN access point
(e.g., wireless LAN router)
Wireless LAN
Items required to use the wireless LAN function
… Wireless USB Adapter (sold separately: WNA1100-RL)
… Wireless LAN access point (e.g., wireless LAN router) *1 *2 *3
… iPad etc.
*1 The wireless LAN access point you use must support WPS. If your
wireless LAN access point does not support WPS, you can connect
using the procedure described in "Connecting to a Wireless LAN
Access Point That You Select (Select Access Point)" (p. 51).
*2 The ability to connect with all kinds of wireless LAN access points is
not guaranteed.
*3 If you're unable to connect to the wireless LAN access point, try
connecting using Ad-Hoc mode (p. 52).
*4 Depending on the wireless LAN system that you're using, you might
be unable to connect, or the connection might be dropped.
*5 Depending on the wireless device used by the wireless LAN
function, noise might be heard from the RD-800. In this case, you
may be able to improve the situation by moving the wireless device
away from the RD-800, or by changing the wireless connection
mode (WPS / ad-hoc mode).
*6 The sound and functionality might be temporarily affected while a
connection is being established; this is not a malfunction.
50
Explanation
No sounds are played, even when keys in
the range set in Key Range are pressed.
Sounds are played when keys in the range
set in Key Range are pressed.
RD-800
Wireless USB Adapter (sold
separately: WNA1100-RL)
Wireless LAN

Basic Connection Method (Connect by WPS)

The first time you connect the RD-800 to a wireless network, you'll
need to perform the following procedure (WPS) to join the wireless
network.
This procedure is required only the first time. (Once you've joined
the network, this procedure will no longer be necessary.)
What is WPS?
This is a standard that makes it easy to make security settings
when connecting to a wireless LAN access point. We recommend
that you use WPS when connecting to a wireless LAN access point.
1.
Insert the wireless USB Adapter
(WNA1100-RL; sold separately) into the RD-800's USB
MEMORY/WLAN ADAPTOR port.
2.
In the MENU screen, select "Wireless" and press the
[ENTER] button.
3.
Press the cursor [ ] [ ]
buttons to select the "WPS,"
then press the [ENTER]
button.
The WPS screen appears.
4.
Perform the WPS operation
on your wireless LAN access
point (e.g., press the WPS
button on your wireless LAN access point).
For details on WPS operation of your wireless LAN access point,
refer to the documentation for your wireless LAN access point.
5.
Press the [ENTER] button of the RD-800.
Once successfully connected, "Completed" will appear.
* If you fail to connect, refer to "Troubleshooting" (p. 57).
NOTE
The device (e.g., iPad) running the app must be connected to
the same network.
MEMO
• The connection data is stored in memory when you perform
the WPS procedure; the device will automatically connect to the
wireless network the next time.
• All connection data will be erased if you perform a factory reset.
Icons in the display
The wireless LAN status is shown in the display.
Icon Explanation
Currently connected to the wireless LAN access point. Three bars
are used to indicate the signal level (the strength of the connected
wireless LAN access point's radio signal).
The wireless USB adapter is inserted, but not connected with a
wireless LAN access point.
The wireless USB adapter is not inserted (nothing is displayed).
p. 52
Ad-Hoc mode ( ).