Table of Contents
Advertisement
Panel connector (20 pin PANEL)
The following diagram illustrates items 26-31:
P4S533-E
P4S533-E System Panel Connectors
26. System Power LED Lead (3-1 pin PLED)
This connector supplies the system power LED. The LED lights up when
the system power is on, and the LED blinks when the system is in sleep
or soft-off mode.
27. System Warning Speaker Lead (4 pin SPEAKER)
This connector supplies the case-mounted speaker to sound system
beeps and warnings.
28. System Message LED Lead (2 pin MLED)
This connector supports the system message LED to indicate receipt of
messages from a fax/modem. The normal status for this LED is ON,
when there is no incoming data signal. The LED blinks when data is
received. The system message LED feature requires an ACPI OS and
driver support.
29. System Management Interrupt Lead (2 pin SMI)
This connector permits switching to suspend mode, or "Green" mode:
system activity is decreased to conserve power and system components.
Attach the case-mounted suspend switch this 2-pin connector.
30. ATX Power Switch / Soft-Off Switch Lead (2 pin PWRSW)
The system power is controlled by a momentary switch attached to this
connector. Pressing the button switches the system between ON and
SLEEP, or ON and SOFT OFF, depending on the BIOS or OS settings.
Pressing the button while in the ON mode for more than 4 seconds turns
the system off.
31. Reset Switch Lead (2-pin RESET)
This connector supports the case-mounted reset switch for rebooting
the system without turning off the power switch.
44
®
Speaker
Connector
Power LED
Reset SW
Message LED
ATX Power
SMI Lead
Switch*
Requires an ATX power supply.
*
Chapter 2: Hardware information
Hide quick links:
Advertisement
Table of Contents
