GEM GL600-S Specification Sheet

Fire Exposure and Hose Stream Tests were conducted in
accordance with the standard, "Positive Pressure Fire Tests of
Door Assemblies," ANSI / UL 10B and 10C, uniform building
code standard UBC 7-2 (1997).
Features
High reliability
Stainless steel housing
MOV provides spike and surge protection
Dual voltage 12 or 24 VDC (selectable)
Anti-Residual magnetism function
Statement
GL600-S is designed for surface mount on
out-swing doors. With stainless steel housing, it
is suitable for outdoor applications and severe
weather conditions. GL600R-S comes with
magnetic bond sensor indicating locked and
unlocked status.
Specification
Operating Voltage: Single Voltage: 12 or 24VDC
Dual Voltage: 12/24VDC
Current Draw: 500mA/12VDC, 250mA/24VDC
(at temperature 20ºC)
Operating Temperature: -10~55ºC (14~131ºF)
Humidity: 0~95% non-condensing.
Holding Force: 600 lbs (272 Kg)
Dimensions:
Magnet:(L) 203, (W) 43, (D) 40 mm
Armature Plate:(L) 159, (W) 41, (D) 14 mm
Special Finishes for magnet and armature plate: Zinc plated
Epoxy Potting Compound: E87252 (S), UL94V-0
Net Weight: 2.0 Kg
Bond sensor output (GL600R-S): 0.5A/20VDC
Copyright © Gianni Industries, Inc. All rights reserved.
DM-CA-GL600-S Ver. F Published on 2011.08.26
GL600-S Mini Magnetic Lock
Surface Mount and Waterproof
Regular Installation
This series of Waterproof Magnetic Lock is
potting compound. Also, GEM Waterproof Series Magnetic
Locks have been proved to withstand water with the test
procedures of IPX7, IPX8 by a trusted third party. Therefore
users need not worry that the lock will rust or spark, if the lock
is in outdoor applications and installed in confined space
where inflammable gases are stored.
Magnet Armature
(Power On)
Anti-residual statement
Our electromagnet locks feature Anti-Residual Magnetism
(ARM) which ensures the door can be opened without any
resistance from left over magnetism imparted to the armature
plate
GIANNI INDUSTRIES , INC.
No. 13, Zhongxing Rd., Tucheng Dist., New Taipei
City 236,Taiwan (R.O.C.)
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876
E-Mail: inquiry@gianni.com.tw
Website: gianni.tw
protected by epoxy
Magnet
Armature
(Power Off)