Topcom BPM WRIST 3311 User Manual page 12

TOPCOM BPM Wrist 3311
12 Procedure
1. Press the SET button repeatedly to select the
desired memory zone.
2. Press the START/STOP button to start
measurement. The cuff will inflate to the level that is
right for you.
3. When the right level is reached, the cuff will deflate.
This monitor will re-inflate automatically to
approximately 220mmHg if the system detects that your
body needs more pressure to measure your blood
pressure.
4. When the measurement is completed, systolic,
diastolic and pulse will be shown simultaneously on
the LCD screen.
5. When a mistake was detected during measurement
the Error icon
12
appears on the display