GEM GL-1200S Specification Sheet

Fire Exposure and Hose Stream Tests were conducted in
accordance with the standard, "Positive Pressure Fire Tests of
Door Assemblies," ANSI / UL 10B and 10C, uniform building
code standard UBC 7-2 (1997).
Features
Low maintenance with high reliability
Stainless steel casing
High reliability
Dual voltage 12 or 24 VDC (selectable)
MOV provides spike and surge protection
Anti-Residual magnetism function
Holding force up to 1200lbs
Statement
GL-1200S is designed for surface mount on
out-swing doors. The maglock can be configured
to mount on in-swing doors with optional LZ-
shaped brackets. It achieves waterproof rating
IPX 7 and is suitable for outdoor applications.
GL-1200S- R comes with magnetic bond sensor
indicating locked and unlocked status.
Specification
Operating Voltage: Single Voltage: 12 or 24VDC
Dual Voltage: 12/24VDC
Current Draw:
Single Voltage: 460mA/12VDC, 250mA/24VDC
Dual Voltage: 500mA/12VDC, 250mA/24VDC
(at temperature 20ºC)
Operating Temperature: -10~55ºC (14~131ºF)
Humidity: 0~95% non-condensing.
Holding Force: 1200 lbs (545 Kg)
Dimensions:
Magnet:(L) 220, (W) 68, (D) 41 mm
Armature Plate:(L) 185, (W) 62, (D) 16 mm
Surface finish for magnet and armature plate: Zinc plated
Epoxy potting compound rating: E87252 (S) UL94V-0
Net Weight: 5.0 Kg
Bond sensor output (GL-1200S-R): 0.5A/20VDC
Copyright © Gianni Industries, Inc. All rights reserved.
DM-CA-GL-1200S Ver. F Published on 2011.08.30
GL-1200S Standard Surface
Waterproof Electromagnetic Lock
Regular Installation
This series of Waterproof Magnetic Lock is
potting compound. Also, GEM Waterproof Series Magnetic
Locks have been proved to withstand water with the test
procedures of IPX7, IPX8 by a trusted third party. Therefore
users need not worry that the lock will rust or spark, if the lock
is in outdoor applications and installed in confined space
where inflammable gases are stored.
Magnet Armature
(Power On)
Anti-residual statement
Our electromagnet locks feature Anti-Residual Magnetism
(ARM) which ensures the door can be opened without any
resistance from left over magnetism imparted to the armature
plate
GIANNI INDUSTRIES, INC.
No. 13, Zhongxing Rd., Tucheng Dist., New Taipei
City 236,Taiwan (R.O.C.)
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876
E-Mail: inquiry@gianni.com.tw
Website: gianni.tw
protected by epoxy
Magnet
Armature
(Power Off)