Connect Power; Play; Play Cd - Philips AZ420/12 User Manual

Connect power

Warning
•
Risk of product damage! Ensure that the power supply
voltage corresponds to the voltage printed on the back
or the underside of the apparatus.
•
Risk of electric shock! When you disconnect the AC
power, always pull the plug from the socket. Never pull
the cord.
Note
•
Install the apparatus near the power supply socket and
where the power plug can be easily reached.
1
Connect the AC power cord to the AC
input jack on the apparatus and to the
power supply socket.
• To switch the apparatus off completely,
disconnect the AC power cord from
the power supply socket.
Note
•
To save energy: after use, turn off the apparatus.
Turn on
Press .
» The unit switches to the last selected
source.
Switch to standby mode:
• The unit switches to standby mode
automatically when there it is idle for over
15 minutes.

4 Play

Play CD

1
Open the disc compartment and insert a
disc with the printed side facing up.
2
Press SOURCE repeatedly to select the
CD source.
Displayed on the panel.
»
• To pause/resume play, press
• To stop play, press
• To skip to a track, press
• To search within a track, press and hold
/ . Release to resume normal
play.
• To select an album, press ALBUM +/-.
.
.
/ .
EN
8