Options During A Call; Write Text; Text Modes - Nokia 7210 Supernova User Manual

Write text

1. In the standby mode, press and hold the right selection key. A short tone
sounds, and Speak now is displayed.
2. Say the name of the contact you want to dial. If the voice recognition is
successful, a list with matches is shown. The phone plays the voice command
of the first match on the list. If it is not the correct command, scroll to another
entry.

Options during a call

Many of the options that you can use during a call are network services. For
availability, contact your service provider.
During a call, select Options. The available options may include the following:
Call options are Mute or Unmute, Contacts, Menu, Lock keypad, Record, Voice
clarity, Loudspeaker or Handset.
Network options are Answer or Reject, Hold or Unhold, New call, Add to
conference, End call, End all calls, and the following:
● Send DTMF — to send tone strings
● Swap — to switch between the active call and the call on hold
● Transfer — to connect a call on hold to an active call and disconnect yourself
● Conference — to make a conference call
● Private call — to have a private discussion in a conference call
Warning: Do not hold the device near your ear when the loudspeaker is
in use, because the volume may be extremely loud.
4. Write text

Text modes

To enter text (for example, when writing messages) you can use traditional or
predictive text input.
When you write text, press and hold Options to toggle between traditional text
input, indicated by
languages are supported by predictive text input.
The character cases are indicated by
case, press #. To change from the letter to number mode, indicated by
and hold #, and select Number mode. To change from the number to the letter
mode, press and hold #.
To set the writing language, select Options > Writing language.
20
, and predictive text input, indicated by
, , and . To change the character
© 2008 Nokia. All rights reserved.
. Not all
, press