Asus WL-330GE User Manual page 6

Disable your PC's proxy settings when using web configuration. Make
sure the WL-330gE and your PC are under the same subnet. Check
the contents of the Internet protocol (TCP/IP) settings of your local area
connection.
2. Specify an SSID (Service Set Identifier), which is a unique identifier
attached to packets sent over WLAN.
3. Select a security level to enable encryption methods:
Low(None): No security level.
Medium (WEP-64bits)
Medium (WEP-128 bits)
High (WPA-PSK/WPA-PSK)
4. (Optional) Choose Enable Hotspot Mode to connect to the hotspot
wirelessly.
5. Click Finish to save the configuration.
After setting the ASUS WL-330gE in Gateway mode, you need to connect
the WL-330gE's LAN port to an ADSL modem through an RJ45 cable. You
can only set up your local network wirelessly such as through Windows
Zero Configuration or your wireless card utility on your PC.
You can set up the advanced functions. Click the Advanced Setting link
to go to the Advanced Setting screen.
6 ASUS WL-330gE Portable Wireless 4-in-1 Router
®