Danby DER2099W Owner's Use And Care Manual page 39

1. Before Starting
PARTS INCLUDED
•
Anti-Tip bracket
•
Anchor sleeves
•
Bolts
NORMAL INSTALLATION STEPS
For leveling legs and Anti-tip bracket:
•
Adjustable wrench or channel lock pliers
•
Electric or hand drill
•
Wood floors: 3/16" drill bit
•
Concrete/ceramic floors: 13/32" carbide-tipped masonry drill bit
•
3/8" nut driver
For gas supply connection:
•
Pipe wrench
For burner flame adjustment:
•
Phillips head and blade-type screwdrivers
For gas conversion (LP/Propane or Natural)
•
Open end wrench – ½"
Additional materials you will need:
•
Gas line shut-off valve
•
Pipe joint sealant that resist action of LP/Propane gas
•
A new flexible metal appliance conduit (½" NPT x ¾" or ½" I.D.) must be design certified
by CSA International. Because solid pipe restricts moving the range we recommend using
a new flexible conduit (4 to 5 foot length) for each new installation and additional
reinstallations
•
Always use the 2 new flare union adapters (½" NPT x ¾" or ½" I.D.) supplied with the new
flexible appliance conduit connection of the range.
•
Tape measure
•
Safety glasses
•
Pencil
•
Level
•
Hammer (may be needed for anchors)
TOOLS YOU WILL NEED