Connecting To A Stereo Audio System Through Rca-Style Cable - Oppo BDP-95 User Manual

I N S T A L L A T I O N

Connecting to a Stereo Audio System through RCA-style Cable

If your audio system offers only stereo audio inputs, or if you would like to connect a dedicated
stereo audio system in addition to the surround audio system which is already connected to the
HDMI, coaxial or optical output, you can connect the dedicated stereo audio system to the
STEREO AUDIO OUT terminals of the player.
Two groups of dedicated stereo audio outputs are available on the BDP-95: the RCA-style
connectors and the XLR balanced connectors (shown in the next page). Please make the choice
according to the available connectors on your audio system. Preference should be given to XLR
connectors since they may provide better noise rejection and signal integrity (refer to the NOTE on
page 18).
NOTE
The STEREO AUDIO OUT terminals automatically down-mix the multi-channel audio
source into the stereo signals. However, STEREO AUDIO OUT will NOT be affected by
the "Down mix" modes and other speaker settings in the Audio Processing of Setup Menu
(described in the page 69).
Rear Panel
L
R
AUDIO IN
Stereo or Surround Audio System
Method 7 – Stereo Analog Audio Connection by RCA cables
Audio Interconnect Cable
AUDIO/VIDEO MUL TI-CHANNEL RECEIVER
17