Camera.setup - Leupold RCX User Manual

Camera Status
Camera Setup
1. Install an SD card. An SD card from
another device may already contain
files that will reduce the number of
photos you can take. To optimize the
operation of the camera's SD card,
format it using the controller. This
can be done in the controller setup
menu and by selecting "Format SD
Card" from the bottom of the menu.
This will erase all SD Card contents.
Once the SD card is formatted,
insert it into the camera.
10
2. Open the access door and remove
the AA battery cartridge.
3. Insert 8 batteries with the negative
(flat) end against the contact spring.
4. Insert the loaded battery cartridge
into the camera with the contact
side going in first until the catch
snaps into place. Be sure to close
the bottom door securely after all
setup is complete to ensure good
contact pressure.