Epson Small-in-One XP-700 Quick Manual page 31

4. Remove the auto-duplexer from the back of the printer and check for any
jammed paper.
5. Remove any paper stuck in the auto-duplexer.
Print Quality Problems
■
Load the paper printable side down (usually the whiter, brighter, or glossy side) in the
paper cassettes. Load paper printable side up in the rear paper feed slot.
■
Make sure your paper isn't damp or curled.
■
For the best print quality, use EPSON papers (see page 8) and genuine EPSON ink
cartridges (see page 22).
■
Make sure the type of paper you loaded matches the paper type setting on the touch
screen or in your printer software (see page 16).
■
If you notice light or dark bands across your printouts or they are too faint, run a
nozzle check (see page 20) to see if the print head needs cleaning.
■
If you notice jagged vertical lines, you may need to align the print head. See the online
User's Guide for instructions.
■
The ink cartridges may be low on ink. Check your cartridge status and replace
cartridges, if necessary (see page 23).
■
Clean the scanner glass with a soft, dry, lint-free cloth (paper towels are not
recommended), or use a small amount of glass cleaner on a soft cloth, if necessary. Do
not spray glass cleaner directly on the glass.
Solving Problems
31