Electrolux ESF 66860 User Manual

Electrolux dishwasher

Advertisement

user manual
Dishwasher
ESF 66860

Advertisement

Table of Contents
loading

Summary of Contents for Electrolux ESF 66860

  • Page 1 Dishwasher ESF 66860...
  • Page 2: Table Of Contents

    2 electrolux Electrolux. Thinking of you. Share more of our thinking at www.electrolux.com Contents Safety information Select and start a washing programme Product description Control panel Washing programmes Use of the appliance Care and cleaning Setting the water softener What to do if…...
  • Page 3 3 • Fill the appliance with salt before you start • The manufacturer is not responsible for a washing programme. The grains of salt frost damage. and salty water can cause corrosion or Water connection make a hole in the bottom of the appliance.
  • Page 4: Product Description

    4 electrolux – Cut off the mains cable and discard it. • If the detergent gets into the eyes, – Discard the door catch. This prevents contact immediately a doctor and wet children or small animals from being the eyes with water.
  • Page 5: Control Panel

    5 Control panel On/off button Programme selection buttons Delay start button Indicator lights Display Function buttons Indicator lights Programme-in-progress • It comes on when you select a washing programme. • It stays on for all the duration of the washing programme.
  • Page 6: Use Of The Appliance

    6 electrolux Programme selection buttons • To activate/deactivate the rinse aid dis- penser when the multitab function is on. With these buttons you can select the wash- Refer to 'What to do if...'. ing programme. Press a programme button, • To cancel the washing programme in pro- the related indicator light comes on.
  • Page 7: Use Of Dishwasher Salt

    7 Equivalent scales measure the water hard- • Clarke degrees. ness: Adjust the water softener to the water hard- • German degrees (dH°). ness in your area. If necessary, contact your • French degrees (°TH). local water authority. • mmol/l (millimol for each litre - international unit for the hardness of water).
  • Page 8: Use Of Detergent And Rinse Aid

    8 electrolux 2. Fill the salt container with 1 litre of water (only with the first operation). 3. Use the funnel to fill the salt container with salt. 4. Remove the salt around the opening of the salt container. 5. Turn the cap clockwise to close the salt container.
  • Page 9: Multitab Function

    9 Turn the rinse aid selector to increase or decrease the dosage. Multitab function The multitab function is for combi detergent 2. Make sure that the appliance is in setting tablets. mode. These tablets contain agents as detergent, 3. Press and hold function buttons D and E rinse aid and dishwasher salt.
  • Page 10 10 electrolux – The related programme indicator light How to cancel a washing programme or comes on. a delay start – All other programme indicator lights go If a washing programme or a delay start off. has not started, you can change the se- –...
  • Page 11: Washing Programmes

    11 Remove the load • There can be water on the sides and door of the appliance. Stainless steel becomes • Let the dishes become cold before you re- cool more quickly than the dishes. move them from the appliance. Hot dishes are easily damaged.
  • Page 12: Care And Cleaning

    12 electrolux The pressure and temperature of the and the quantity of dishes can change water, the variations of power supply these values. Care and cleaning To remove and clean the filters 3. Fully clean the parts under running water.
  • Page 13 13 Malfunction Fault code Possible cause Possible solution The appliance does not The display shows The water tap is Clean the water tap. fill with water. blocked or is furred with limescale. The water pressure is Contact your local wa- too low.
  • Page 14 14 electrolux The washing results and drying results are not satisfactory Problem Possible cause Possible solution The dishes are not clean. The selected washing pro- Make sure that the washing pro- gramme was not applicable for gramme is applicable for the the type of load and soil.
  • Page 15: Technical Data

    15 Technical data Dimensions Width 596 mm Height 850 mm Depth 620 mm Water supply pressure Minimum 0,5 bar (0,05 MPa) Maximum 8 bar (0,8 MPa) Cold water or hot water maximum 60 °C Water supply Capacity Place settings 1) Connect the water inlet hose to a water tap with a 3/4'' thread.
  • Page 16 16 electrolux • A stand pipe with vent-hole. The internal diameter must be minimum 4 cm. max 85 cm 2. Pull the worktop from the behind of the min 40 cm appliance (2). Remove the sink plug when the appliance 3.
  • Page 17 17...
  • Page 18 18 electrolux...
  • Page 19 19...
  • Page 20 To buy accessories, consumables and spare parts at our online shop please visit: www.electrolux.co.uk 117943570-C-072010...

Table of Contents