Electrolux EWF 1215 Instruction Book page 9

To restart the programme from the point at which it
was interrupted, press the Start Pause button
again.
5 "Speed 1200" button (Spin reduction)
By depressing this button you can reduce the max.
spin speed proposed by the machine or choose the
(Rinse Hold) option. The relevant light
illuminates. The spin speeds are reduced as follows:
• for cottons: from 1200 to 500 r.p.m.
• for synthetics, wool and handwash: from 900 to
500 r.p.m.
• for delicates: from 700 to 500 r.p.m.
By selecting (Rinse Hold) option the water at the
last rinse is not emptied out to prevent the fabrics
from creasing. The "Rinse Hold" pilot light lights up.
At the end of the programme, the "End" and the
(rinse hold) lights remain lit, the door is blocked to
indicate that the water must be emptied out before
opening the door.
To do this turn the programme selector dial to "O"
and then to programme
The spin programme is performed at the maximum
speed. In order to avoid any creasing in synthetic,
delicate, wool and handwash items, the spin speed
must be reduced by pressing the relevant button.
6 Programme progress display
When you select the programme, the light
corresponding to the max speed of the selected
programme lights up.
Spin speed lights: are on during the washing
programme and remain alight at the end of the cycle.
By selecting (Rinse Hold) option the water at the
last rinse is not emptied out to prevent the fabrics
from creasing. If you have selected this function, the
Rinse Hold pilot light lights up.
(drain) or (spin).
End: when the programme has finished, the "End"
pilot light comes on.
The "End" light flashes in the event of operating
problems:
• 4 flashes: door open
• 2 flashes: problem with water draining
• 1 flash: problem with water supply
For more information see paragraph "Something not
working".
7 Programme selector dial
The selector is divided into 5 sections:
• Cotton
• Synthetic
• Delicate and handwash
• Wool
• Special programmes
O Reset programme/OFF
The selector dial can be turned either clockwise or
anticlockwise.
Position 60E corresponds to the ENERGY SAVING
programme and position
At the end of the programme the selector dial
must be turned to position "O".
Attention!
If during a washing programme the selector dial is
turned to another programme, the pilot lights of the
programme progress display start to flash. The
machine will not perform the new selected
programme.
68
to "cold wash".