The Control Panel - Electrolux EW 1007 F Instruction Booklet

The Control Panel

1 Programme guide
2 HEAVY SOIL button
By depressing this button the machine will take in cold
water on programmes with a water temperature of
50°C, 60°C and 95°C (programmes A, B, C for cotton
and J for synthetic).
These would normally be hot and and cold, or hot fill
only.
The water is then gradually heated to the required
temperature. The effect is to improve the overall wash
performance, particularly on biological stains such as
egg, blood and grass stains,, and heavily soiled fabrics,
since the longer "cool-soak" phase as the water heats up
provides the right conditions for the powder and the
water temperature to interact, and achieve the best
possible results.
3 HALF LOAD button
Select this button to reduce water consumption on the
rinse cycle when washing a smaller load of cottons or
linens (maximum load size = 2.25 kg).
4 RINSE HOLD Button
Press this button to make the machine stop with water
in the drum after the cotton, synthetic or delicate wash
cycles.
This prevents any creasing which may occur if the
clothes are left damp in the drum. When it is
convenient for you to empty the machine, simply press
this button again so that the machine can proceed to
drain and spin, or turn the dial to the drain programme
"R".
If this button is not activated, the washing programmes
will end with a spin.
SPIN
5 ECO button
By depressing this button prior to selecting wash
programmes A and B, you will obtain a reduction of
the wash temperature from 95°C to 50°C. This will
ensure a substantial saving in electricity consumption.
The duration ot hte programme will be prolonged by
aprox. 20 minutes.
On programme C the wash temperature will be reduced
from 60°C to 50°C but the duration of the programme
will not alter.
It is advisable to use ECO function when washing
fabrics which are lightly soiled.
6 ON-OFF button
By depressing this button the machine starts operating.
When depressed again, the machine stops.
7 MAINS-on light
This light illuminates when the machine starts working
and goes out when the ON/OFF button is released.
8 Programme selector dial
Turn the dial clockwise to select the required wash
programme.
Before setting the dial to any position the machine must
be switched off by depressing the ON/OFF button
again.
6