Table of Contents
Advertisement
3. Confirm using the SELECTION
ton.
The appliance is now ready to use.
3
If you would like to change one of these base settings at a later date, please refer to the
SETTINGS MENU section.
Initial cleaning
Clean the oven before using it for the first time.
1
Important: Do not use caustic or abrasive cleaning agents! These can damage the oven
surfaces.
3
For the metal surfaces, use commercially available cleaning agents.
1. Open the oven door.
The oven light is illuminated.
2. Remove all oven accessories, and clean them with warm water and washing up liquid.
3. Wash the oven in the same way, and wipe dry.
4. Wipe the front of the appliance with a damp cloth.
Using the Rings
3
Also refer to the operating instructions for your built-in hob. It contains important in-
formation on ovenware, operation, cleaning and care.
The following description does not apply to induction cooking zones.
Heat settings
• You can set the heat settings from 1 -9.
• You can set intermediate settings between 2 and 7.
• In addition each of the ring switches is fitted with an automatic warm up function.
u =Keep warm setting
1 = lowest power
9 = highest power
A = Automatic warm up function
2
Switch the cooking zone off approx. 5-10 minutes before cooking is finished to make
use of the residual heat. This saves electricity.
3
The cooker has pop-up ring switches.
Press the ring switch to use it. The switch will then pop up.
but-
ý ý ý
888û c
þ
wm¸¹º»¼P - +
Using the Rings
ýþ ýþ ý
ý
ý
þü þ 1ü 2 . 2 ü 5
ý
11
ý ý
ý ý
88. 8 ú 8
Advertisement
Table of Contents
