Casio fx-9860GII Instruction Manual page 13

1. Enter the bivariate data into the two lists, as shown in
the last section.
2. Press q (GRPH). (If
press u ( > ) first.)
3. Press u (SET). Scroll down to highlight Graph Type
and press q
Frequency, and Mark Type, if necessary, to change to
the settings pictured on the right. Press
to the previous screen.
r
4. Press (SEL). Only StatGraph1 should be turned on.
If necessary, highlight the desired StatGraph and press
q (On) or w
5. Press u (DRAW).
q is TOOL instead of GRPH,
(Scat). Scroll down to XList, YList,
(Off) to change.
d to return