Kenwood DPX405BT Manual page 13

DPX405BT/DPX305U
3-2. Preparations
Exiting the Demonstration mode
Turn off the Demonstration mode when you use the unit for the first time after
installation.
1. Press the [Control knob] to quit the Demonstration mode when the message
"CANCEL DEMO PRESS VOLUME KNOB" appears (approx. 15 seconds).
2. Turn the [Control knob] to select the "YES" and then press the [Control knob].
The Demonstration mode can also be canceled in the Function Setting mode. Refer
to <11-3. Demonstration mode
3. Basic operations
setting>.
3-2. Preparations