Behringer GMA106 User Manual

{1} INPUT: Connect your guitar to this 1/4" TS input jack.
GAIN: Adjusts the pre gain, and controls the amount of distortion when Overdrive is active.
{2}
OVERDRIVE: Activates the Overdrive function, which boosts the gain and increases distortion.
{3}
VOLUME: Controls the overall volume of the amp.
{4}
{5} TREBLE: Controls the high-frequency range of the guitar signal.
{6} MID: Controls the mid-frequency range of the guitar signal.
{7} BASS: Controls the low-frequency range of the guitar signal.
PHONES: Connect your headphones to this 1/4" TRS output jack. The speakers will automatically be muted.
{8}
POWER: Powers up your amplifier. The POWER switch should always be in the "Off" position before you connect the amplifier
{9}
to the main power source.
+ Please note: The POWER switch does not fully disconnect the unit from the power supply. To disconnect the unit
from the main power source, pull out the main cord plug or appliance coupler. When installing the product, ensure
the plug or appliance coupler is readily operable. Unplug the power cord when the unit is not used for prolonged
periods of time.
For our current warranty terms, please refer to our website at http://www.behringer.com.
Output power 10 W (RMS)
Loudspeaker 6.5", 8 Ω
AC Power U.S./Canada
China
Korea
Europe/U.K./Australia 230 V~, 50 Hz
Japan
General export model 120/230 V~, 50/60 Hz
Power consumption 13 W
Dimensions (H x W x D) approx. 280 mm (11") x 285 mm (11 1/5") x 180 mm (7")
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products
without prior notice. Specifications and appearance may therefore differ from those listed or shown.
+ The sound quality may diminish within the range of powerful broadcasting stations and high-frequency sources.
Increase the distance between the transmitter and the device and use shielded cables for all connections.
+ We would like to bring to your attention the fact that extremely loud sound levels may damage your hearing as well
as your headphones. Please turn the VOLUME control all the way to the left before powering up the unit. Keep the
volume at an appropriate level at all times.

Control elements

Front panel of the GMA106
Warranty

Specifications

120 V~, 60 Hz
220 V~, 50 Hz
220 V~, 60 Hz
100 V~, 50/60 Hz
WARNING!
User Manual