Gigabyte G1.Sniper Z5 User Manual page 11

Storage Interface Š Chipset:
- 6 x SATA 6Gb/s connectors (SATA3 0~5)
- Support for RAID 0, RAID 1, RAID 5, and RAID 10
USB Chipset:
Š
- 6 x USB 3.0/2.0 ports (4 ports on the back panel, 2 ports available through
the internal USB header)
- 7 x USB 2.0/1.1 ports (3 ports on the back panel, 4 ports available through
the internal USB headers)
Internal 1 x 24-pin ATX main power connector
Š
Connectors 1 x 8-pin ATX 12V power connector
Š
6 x SATA 6Gb/s connectors
Š
1 x CPU fan header
Š
3 x system fan headers
Š
1 x front panel header
Š
1 x front panel audio header
Š
1 x S/PDIF Out header
Š
1 x USB 3.0/2.0 header
Š
2 x USB 2.0/1.1 headers
Š
1 x serial port header
Š
1 x Clear CMOS jumper
Š
1 x audio gain control switch
Š
Back Panel 1 x PS/2 keyboard/mouse port
Š
Connectors 1 x coaxial S/PDIF Out connector
Š
1 x optical S/PDIF Out connector
Š
1 x D-Sub port
Š
1 x DVI-D port
Š
1 x HDMI port
Š
4 x USB 3.0/2.0 ports
Š
3 x USB 2.0/1.1 ports
Š
1 x RJ-45 port
Š
5 x audio jacks (Center/Subwoofer Speaker Out, Rear Speaker Out, Line In,
Š
Line Out, Mic In)
I/O Controller iTE I/O Controller Chip
®
Š
Hardware System voltage detection
Š
Monitor CPU/System temperature detection
Š
CPU/System fan speed detection
Š
CPU/System overheating warning
Š
CPU/System fan fail warning
Š
CPU/System fan speed control
Š
* W hether the fan speed control function is supported will depend on the cooler you install.
- 11 - Hardware Installation