Optical Drive
CAUTION:
Product Information Guide.
1 Turn the computer over.
2 Remove the optical-drive security screw.
3 Insert a scribe into the notch and push it to the side to release the drive from the bay.
4 Slide the drive out of the bay.
Hinge Cover
CAUTION:
Product Information Guide.
NOTICE:
periodically touching an unpainted metal surface (such as a connector on the back of the computer).
88
Adding and Replacing Parts
Before you begin any of the procedures in this section, follow the safety instructions in the
notch
Before you begin any of the procedures in this section, follow the safety instructions in the
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by
optical-drive security screw
optical drive