The Main Fan Oven; Uses Of The Fan Oven; Selecting The Fan Oven; Things To Note - Electrolux EOD6335 Instruction Booklet

THE MAIN FAN OVEN

USES OF THE FAN OVEN

The oven is heated by an element around the fan situated behind the back panel. The fan draws air from the oven
and the element heats the air which is circulated into the oven via the vents in the back panel. The advantages of
the fan oven are cooking are:
PREHEATING
The fan oven quickly reaches its temperature, so it is not usually necessary to preheat the oven.
preheating however, you may find you need to add an extra 5 – 10 minutes on the recommended cooking times.
For recipes needing high temperatures, e.g. bread, pastries, scones, soufflés etc., best results are achieved if the
oven is preheated first. For best results when cooking frozen or cooked chilled ready meals always preheat the
oven first.
COOKING TEMPERATURES
Fan oven cooking generally requires lower temperatures than conventional cooking. Follow the temperatures
recommended in the chart on page 32. As a guide reduce temperatures by about 20C° - 25°C for your own
recipes, using a conventional oven.
BATCH BAKING
The fan oven cooks evenly on all shelf levels, especially useful when batch baking.

SELECTING THE FAN OVEN

·
Turn the Main Oven function selector to Fan
Oven.
·
Turn the Main Oven Temperature control to the
required setting.

THINGS TO NOTE

1. The oven fan and internal oven light will come
on.
2. The main oven indicator neon will glow until the
oven has reached the desired temperature. It will
turn ON and OFF periodically during cooking
showing that the
maintained.
3. The cooling fan for the controls may operate after
a time. See page 14 for further details on the
operation of the cooling fan.
4. If an automatic programme is set, the oven fan
and oven light do not come on until the cook time
begins.
temperature is being

TO FIT THE MAIN OVEN SHELVES

The shelves should be fitted with the straight rods
uppermost on the frame and the forms towards the
back of the oven. If not fitted correctly the anti-tilt
and safety stop mechanism will be affected.
24
Without