Ec-Declaration Of Conformity - Jonsered CS 2145 Operator's Manual

TECHNICAL DATA

EC-declaration of conformity

(Applies to Europe only)
Jonsered, SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, declares under sole responsibility that the chain saws Jonsered
CS 2141, CS 2145 and CS 2150 from 2002's serial numbers and onwards (the year is clearly stated in plain text on the type plate
with subsequent serial number), are in conformity with the requirements of the COUNCIL'S DIRECTIVES:
of June 22, 1998 "relating to machinery" 98/37/EC, annex IIA.
of May 3, 1989 "relating to electromagnetic compatibility" 89/336/EEC, and applicable supplements.
of May 8, 2000 "relating to the noise emissions in the environment" 2000/14/EC.
For information relating to noise emissions, see the chapter Technical data. The following standards have been applied: EN292-2,
CISPR 12:1997, EN608.
Notified body: 0404, SMP Svensk Maskinprovning AB, Fyrisborgsgatan 3, SE-754 50 Uppsala, Sweden, has carried out EC type
examination in accordance with the machinery directive's (98/37/EC) article 8, point 2c. The certificates for EC type examination
in accordance with annex VI, have the numbers: 404/00/750 – CS 2141, 404/00/750 – CS 2145, 404/00/749 – CS 2150
In addition, SMP, Svensk Maskinprovning AB, Fyrisborgsgatan 3, SE-754 50 Uppsala, Sweden, has certified conformity with annex
V of the Council's Directive of May 8, 2000 "relating to the noise emissions in the environment" 2000/14/EC. The certificates have
the numbers: 01/161/037 - CS 2141/CS 2145, 01/161/049 - CS 2150.
The supplied chain saw conforms to the example that underwent EC type examination.
Huskvarna 12 September 2002
Bo Andréasson, Development manager
– 39
English